Friday, 23 March 2012

How to configure bsnl broadband modem | How to connect bsnl modem,utstarcom modem configuration

This guide helps you to connect your broadband modem to the internet within minutes.First connect your modem to your pc or laptop through ethernet cable or usb cable.
  1. Open your web browser and type 192.168.1.1 in the address bar and press enter
  2. Write username and password "as admin" in the coming window and then press on the "ok" button

  3.Your router settings window appears.Click on the advanced setup



 4.In the advanced settings window click on the add button.
ff
5. Select your service category as UBR without PCR.Type 35 for VCI and 0 for port and VPI and then press on the next button.
 6.In the coming window select PPP over Ethernet as your connection type and LLC as your encapsulation mode.
 7.In the coming window type you username and password for your internet  connection.Usually the username is like" xx4442282322" (two alphabets followed by your phone number with STD code without zero) and default password is password.
 8.In the coming window confirm that WAN, Firewall and NAT options are enabled.Then press next button.
 9. In the last window click on the save button.
  
 10. Then you will be redirected to the advanced setup starting page.Click on the save/reboot button.
Now wait for 1 minute,your modem will restart automatically and will connect to the internet automatically.

To know how to set-up wireless on your modem see this how-to-configure-wireless-in-bsnl


No comments:

Post a Comment